Immediate Delivery List

To Order On-Line, or see prices, click:

• .504 Lead 2-die set, 1-E FT (CS-1-S, PF-1-SC) w/HP and LT punches.
  This special set for the -S press makes pure lead bullets of high precision, in two dies, for either flat tip or hollow point. Designed for use with a grease wad behind the bullet. This set is outside the normal design parameters for the -S press and is for someone with good mechanical ability (not for the heavy-handed). When used with normal care, and pure lead, it makes extremely high precision .504 diameter bullets.
• BGK-1-S .45 Base Guard Kit
  Make your own BG disks for .452 to .458 diameter bullets. More effective than gas checks because they scrape the fouling out with each shot.
• CSW-1-R .224 or .243 core swage die
  Make precision .190 diameter lead cores for .22 or 6mm bullets, using your standard reloading press. You can add this to any KIT-224R or KIT-243R swage die set to improve the weight control dramatically.
• LT-1-R .224 or .243 core swage die
  Lead tip forming die, puts a factory-finished pointed lead tip on your 22 or 6mm bullets instead of the flat tipped lead which comes out of the point form die. Add to any 224 or 6mm kit, to use your reloading press for professional lead-tip rifle bullets.
• CBP-50 Corbin 50 BMG Bullet Puller
  Pull 50 BMG bullets (.512) using the power of a reloading press, without impact or slow, screw type collet tools. Fast, marr-free operation.
• RFJM-22S Rimfire Jacket Maker
  Make free .224 jackets out of fired .22 LR or .22 Short jackets; accurate, easy on the bore, from 45 to 60 grains. $129.50
• JRD-1-S 243 to 224
  Make long, heavy walled .224 jackets for high velocity or heavy weight bullets, using standard .243 jackets such as the Corbin J-6M-103.
• LSWC-1-S 452 3/4-E FB or BG
  Round nosed flat base or Base Guard (your choice) base .45 handgun bullets. Add LW-10 .430 lead wire, PCS-2 core cutter w/.430 dies, CSL-2 swage lube, JBG-45 Base Guards (pkg of 1000). A limited quantity of LSWC-1-S 452 dies are in stock now.
• FJFB-3-S 452 3/4-E or TC 3-die set
  Available in TC (truncated conical) nose shape, or in 3/4-E round nose shape. Make jacketed or lead bullets. Add J-45-540 jackets, LW-10 .365 lead wire, PCS-1 core cutter, CSL-2 swage lube. Limited quantity of 3-die sets in stock
• LSWC-1-S .458 rifle 1-E Cup Base
  Make round nose cup base lead bullets for .45-70, .458, other .45 rifles. Use Corbin MSL-11 spray lube for smokeless loads, or get the HCT-3 grooving tool to make lube grooves (the lube, and lightly reswage for perfect compressed lubricant rings). LSWC-1-S .458
• FJFB-3-M 452 1/2-E nose 3-die set
  Available in 1/2-E round nose shape. Make jacketed or lead bullets. Fits early CSP-3 Silver Press, most early Mity Mite horizontal presses, as well as current CSP-1 S and Series II presses. Limited quantity of 3-die sets in stock
• RBTO-4-H .338 4-S 4-die RBT set
  Rebated boattail, open tip spitzer bullets (use tubing jackets for outstanding hunting bullets, especially with bonded cores using CCB-2 core bond)
• RBTO-4-H .308 6-S 4-die RBT set
  Rebated boattail, open tip spitzer bullets for 7.65mm or .30 caliber bullets (use J-30-125 jackets to make 168-180 grain bullets.
• LSWC-1-H .320 3/4-E HB pistol
  Round nose, hollow base .320 diameter lead bullets. Use with Corbin MSL-11 moly spray lube, or Corbin CDL-16 clear wax dip lube.
• LSWC-1-H .355 3/4-E pistol
  Round nose 9mm diameter lead bullets. Use with Corbin MSL-11 moly spray lube, or Corbin CDL-16 clear wax dip lube.
• BGK-1-H Base Guard Maker, 38/9mm
  Make your own Base Guard disks from .030-.035 thick copper strip. Fits any of the .38/9mm calibers from .354 to .363 diameter (all the way to 9.3mm Makarov).
• CTJM-1-H 9mm/357 tubing jacket maker
  Build high power hunting bullets for any of the 9mm/38/357 handguns, including heavy hunting bullets for .357 Maximum, .357 Magnum. Uses 3/8-diameter x .035 wall tubing available from Corbin (and dozens of tubing distributors).
• BGK-1-S Base Guard Maker Kit.
  .45 caliber base guard dies.
• CM-4 core moulds.
  All standard diameters.
• CM-3 core moulds.
  A few .365, .390, and .430 diameter.
• HCT-1 hand cannelure tool.
  Adjusts from .22 to .72 caliber, precise depth and position setting. Example: use standard 40mm bullets with proper "crimp" groove applied in a .38-40 cartridge.
• HCT-2 bullet knurling tool.
  Roll diamond knurl pattern into lead bullets to hold Dip Lube or spray lube.
• HCT-3 lead bullet grooving tool.
  Roll two grooves at a time on lead bullets, from .22 to .72 caliber.
• PCM-1 power cannelure tool, 115v.
  All standard calibers available. Run 30-50 pieces per minute.
• SAW-1 tubing cutter saw, 115v.
  Cut copper, brass, and aluminum tubing to exact length with clean square ends. Cut up to 3 inches from the end of a long tube with positive stop adjustment.